王涛,尹延国,张国涛,尹利广,解挺,田明

• 1:合肥工业大学摩擦学研究所

摘要(Abstract)：

通过室温化学渗硫技术在45钢表面制备渗硫层,采用M-200型摩擦磨损试验机评价了渗硫层在定载荷和变载荷下的摩擦磨损性能,用扫描电子显微镜和X射线衍射仪观察并分析了渗硫层的形貌、结构、物相组成及其磨痕形貌。结果表明,通过室温化学渗硫后,45钢表面形成一层渗硫层,经过30 mim,渗硫层厚度约为4μm,渗硫层主要物相为FeS,还有少量Fe1-xS和氧化物。渗硫层减摩耐磨效果明显,有效改善钢的粘着磨损特性。

关键词(KeyWords)： 室温;化学渗硫;渗硫层;摩擦磨损

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(50975072)

作者(Author): 王涛,尹延国,张国涛,尹利广,解挺,田明

DOI: 10.13289/j.issn.1009-6264.2014.11.031

参考文献(References)：

• [1]胡志彪,李贺军,付前刚,等.低摩擦系数固体润滑涂层研究进展[J].材料工程,2006(3):60-68.HU Zhi biao,LI He-jun,FU Qian-gang,et al.Research progress on low friction coefficient sol id lubricating coatings[J].Journal of Materials Engineering,2006(3):60-68.
• [2]江静华,涂益有,方峰,等钢铁渗硫技术及其发展趋势[J].金属热处理,2000,25(4):19-21.JIANG Jing-hua,TU Yi-you,FANG Feng,et al.Sulphurizing technology of steel and iron[J].Heat Treatment of Metals,2000,25(4):19-21.
• [3]张宁,庄大明,王燕华,等.低温离子渗硫层的结构和减摩性能[J].材料研究学报,2000,14(1):61-65.ZHANG Ning,ZHUANG Da-ming,WANG Yan-hua,et al.Structure and friction-reducing property of low temperature ion sulphuration layer[J].Chinese Journal of Material Research,2000,14(1):61-65.
• [4]居毅.20#碳钢表面室温电解渗硫层的减摩性能[J].摩擦学学报,2001,21(2):98-101.JU Yi.Friction-reduction behavior of sulfurized layer on the surface of a carbon steel electronlytically surphurized at room temperature[J].Tribology,2001,21(2):98-101.
• [5]Zhang P,Zhao J J,et al.The tribological properties of low temperature ion sulfidized coating of steels[J].Surface and Coatings Thechnology,2003,21(2):386-390.
• [6]江静华,蒋建清,马爱斌,等.室温盐液渗硫[J].金属热处理,2002,27(12):33-35.JIANG Jing-hua,JIANG Jian-qing,MA Ai-bin,et al.Brine sulfurizing at room temperature[J].Heat Treament of Metals 2002,27(12):33-35.
• [7]关耀辉,徐扬,郑仲瑜,等.等离子喷涂纳米FeS涂层的摩擦磨损性能研究[J].摩擦学学报,2006,26(4):320-323.GUAN Yao-hui,XU Yang,ZHENG Zhong-yu,et al.Tribologiacal properties of nanostructured iron sulfide coating deposited by plasma spraying[J].Tribology,2006,26(4):320-323.
• [8]王海斗,庄大明,王昆林,等.FeS固体润滑涂层的结构分析及磨损行为比较[J].金属学报,2003,39(10):1031-1036.WANG Hai-dou,ZHUANG Da-rning,WANG Kun-lin,et al.Microstructures and wear-resistance behavior of ferrous sulfide coatings[J].Acta Metallurgica Sinica,2003,39(10):1031-1036.
• [9]杨臻,底月兰,张平,等.CrN/MoS2固体自润滑复合膜渗硫层相结构研究[J].装甲兵工程学院学报,2012,26(4):78-82.YANG Zhen,DI Yue-lan,ZHANG Ping,et al.Study on phase structure in CrN/MoS2 solid self-lubricant composite film sulfurized layer[J].Journal of Academy of Armored Force Engineering,2012,26(4):78-82.
• [10]王海斗,庄大明,王昆林,等.低温离子渗硫层的干摩擦学性能对比研究[J].材料热处理学报,2002,23(4):30-34.WANG Hai-dou,ZHUANG Da-ming,WANG Kun-lin,et al.A comparative study on wear resistance of ion sulf ide layers of different steels[J].Transactions of Materials and Heat Treatment,2002,23(4):30-34.
• [11]王劲松,董玉雪,毛玉红,等.低温离子渗硫表面处理对满装滚子轴承寿命的影响[J].轴承,2012(1):29-30.WANG Jin-song,DONG Yu-xue,MAO Yu-hong,et al.Low temperature ion sulphurizing surface treatment effect on full roller bearing life[J].Bearing2012(1):29-30.
• [12]王海斗,庄大明,王昆林,等.高速钢离子渗硫层的摩擦磨损性能研究[J].摩擦学学报,2002,22(4):250-253.WANG Hai-dou,ZHUANG Da-rning,WANG Kun-lin,et al.Tribological properties of sulfide layer on high speed steel under dry sliding[J].Tribology,2002,22(4):250-253.
• [13]张宁,庄大明,王燕华,等.低温离子渗硫层的摩擦学性能研究[J].摩擦学报,1999,19(4):348-353.ZHANG Ning,ZHUANG Da-ming,WANG Yan-hua,et al.Study on the Tribological properties of sulfide layer produced by ion sulphurization[J].Tribology,1999,19(4):348-353.
• [14]曲宝建,王修春,李洪民,等.低温离子渗硫工艺及渗硫层微观组织的研究[J].山东科学,1998,11(3):22-25.QU Bao-jian,WANG Xiu-chun,LI Hong-min,et al.The study on microscopical constitution of sulphurized layer and Technology for Low Temperature Ion_Sulphurizing[J].Shang Dong Science,1998,11(3):22-25.
• [15]Wang H D,Zhuang D M,Wang K L,et al.Comparison of the tribological properties of an ion sulfurized coating and a plasma sprayed FeS coating[J].Materials Science and Engineering A,2003,357:1321-327.

文章评论(Comment)：